|
||
Title: 2 USB to Midi- One Roland XP80, One Korg NX5r Rack Post by RaiBeck on Nov 10th, 2023, 7:04am Hi there, I am a bit handicapped with my eyes, so please excuse my typos, I work with 800x600 and have still the MS-Screen Lens in use Now then... My Xp-80 connected via Midisport USB worked Rx/Tx all fine I made Thru Port to the Korg Nx5r=(NS5r+Yamaha XG Module) Now the Korg doesnt recieve anything, itself, it does seem to send midi ticks - demo songs gives LED indication. BTW I programme my Synths either in VB.Net or -if it is (really really) necessary- in C# I prefer the SysExCommands but I use NAudio in VisualStuadio Have you any idea to control both of my Sythies, doesnt matter if it´s in MS-VStudio, MidiOx, even (yes I bought it 2003) CubaseSX or Cakewalk To whom it may.... Thanks |
||
Title: Re: 2 USB to Midi- One Roland XP80, One Korg NX5r Post by Breath on Nov 10th, 2023, 5:18pm Hi You don't say what MidiSport device you are using, but if it is the 2x2 it has a 'Direct Thru' button. Is this what you are talking about or is it a UNO or a different MidiSport (4x4 or 8X8)? I'll assume it is a UNO and you have used the In, Out and Thru On the XP-80 PC-> USB-> UNO Out -> XP-80 In XP-80 Thru -> NS5r In Either: XP-80 Out -> UNO In -> USB-> PC or NS5r Out -> UNO In -> USB-> PC If you want both synths connected youw ill need either a MidiSport 2x2 (or greater) or A hardware Midi merger like Midi Solutions Merger https://midisolutions.com/prodmrg.htm Xp-80 Out -> Merger In 1 NX5r Out -> Merger In 2 and Merger Out (either one) -> UNO In If you are sending or receiving Sysex the header will separate the data. The M-Audio driver is MultiClient so you can have the two editors running t the same time. Hope the helps Royce |
||
Title: Re: 2 USB to Midi- One Roland XP80, One Korg NX5r Post by RaiBeck on Dec 21st, 2023, 9:34am Sorry for the late reply, no excusion just MeMyselfAndI missed it. You were right, it´s a MidiSportUno. I (now) have the USB to the XP80 In and Out - and a single 5PinMidi via Thru to the Korg. Works good - even sending Sysex to the Korg incl. Sound Definitions- I do it all with "full qualified" SysEx Msgs, giving me the possibility to set up the Channels I need by muting the Korg or the Other when playing or recording. So far, my programs etup ist made for playing, having the Banks/Patches/tones for both (and my Niece´s) little Yamaha in a small SQLExpress (for testing also a SqlLite) with all MSB/LSB. For receiving what is on the panels the Programm reads the "SYSTEM COMMONS" from the XP80 (or I replug the MdiiUno to the Korg, he is so 'lonelyplugged') getting quite everyting. As I have gotten deeper into the Midi Implementations of Korg/roland (could have been easier) /yamaha(their XG is open) and akai/oberheim (it is sailing with hopefully well chartered maps) I wrote some Forms with totally unboung Sliders Knobs Pitchers that will adjust to the Instrument what is chosing. But before/aside the Sound editing, the goal is to get the SysEx´s dumps into the machines 1. (Dump/Single/IdontKnow) *.Syx is read (maybe as a BYTESTRAM into BLOB) -done 2. BLOB will be divided by anything like "F0... F7" "...F7 F0..." must and will(!) do -nearby --- { 3. or 1. Order BLOB by SysX Header (beside F0 F7 because the specific Devices Header differs, maybe a resource-file or even a table for Maufacturer/Devive/InstantceNo. } -to do to want 4. Turning the "selected" BLOB into a temoprary Table/Stream to prevent owerwrite the original 5 Sending out, should be saved (ok. r/w protection check) Am i so far right with my project? There is plenty of stuff out there for free, I know. But why should I learn Cakewalk or Steinberg editing for hours and days without knowing_ what that and this and tat on slide or knob does? Hope you can nderstand my crazy thoughts Nice holidays the year end |
||
MIDI-OX User Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |