MIDI-OX User Forum - Print Page


    
      
        MIDI-OX User Forum
        (http://www.midiox.com/cgi-bin/yabb/YaBB.pl)
      

        MIDI-OX >> Mapping Questions >> Remap note control
        
(Message started by: seedhay on Nov 9^th, 2022, 3:49pm)

Title: Remap note control
Post by seedhay on Nov 9^th, 2022, 3:49pm

I would like to play a C note on the Keyboard but would like the end played note to be E I have a few other notes that need to be done this way.
Will Midiox perform this task The keyboard will be controlling the program varranger

Thanks
Seedhay

Title: Re: Remap note control
Post by Breath on Nov 9^th, 2022, 10:07pm

Hi
MidiOx can do this.
You use the menu Options/Data Mapping..
Look in the menu Help to start off.
There is a separate section of the forum for Mapping help.
If you are still having problems feel free to post again.

All the best
Royce

Title: Re: Remap note control
Post by seedhay on Nov 9^th, 2022, 11:41pm

Thank You for the fast reply, I'll dig into this and see how it works

Seedhay

Title: Re: Remap note control
Post by Jamie OConnell on Nov 10^th, 2022, 11:06am

You'll probably also need a MIDI loopback driver to communicate between MIDI-OX and your VArranger program.

Title: Re: Remap note control
Post by seedhay on Nov 11^th, 2022, 11:18am

Hi Jamie
Where would I find this program? is there a way that someone could do a recipe for the task I am trying to do, or create a file, I went through the help pages and I'm afraid I'll learn to speak another language before I understand how to reassign the notes ,
The task I am looking to do is to take a keyboard and place it directly in front of a real piano starting at the F below middle C and mirror the real piano notes on the keyboard so that I can play the rythms of the varranger programs by dropping one finger onto the keyboard as I play the real piano to send the correct key change note to varranger.

I have made a similar settup using parts and making my own keyboard but I'm limited to only 8 notes and if I can configure the midi keyoard to remap I will get access to all 12 notes.

I'm open to paying for the service depending the price.

Thanks
seedhay

Title: Re: Remap note control
Post by Jamie OConnell on Nov 14^th, 2022, 2:14am

Try https://www.nerds.de/en/loopbe1.html for LoopBe1. IIRC MIDI-OX is installed with a map to reverse the keyboard: basically, you are remapping notes 0 - 127 into 127 - 0. You then send that output to your VArranger program via the LoopBe1 driver.